Milling capacity: X = 2600mm, Y = 250mm, Z = 168mm
Machinable profile can be longer than the X milling capacity (2600mm) with the option of alternate use of stops on the left and right of the machine.
Set-up for central greasing for recirculating ball-screws and linear guides
Suspended control console and electronic equipment, with graphic display to make the program simple and intuitive to use and an option to program a machining sequence.
Pneumatic rotation of the work table 0°, 90° to 180°
Work table height 850mm, adjustable between 830mm and 880mm
Work table rotation in complete safety thanks to the selector and the dead man’s pushbutton
Manual tool magazine with 5 no. cone holders on the head
Beam rotation stop kit for machining intermediate angles at 2 positions, manually operated (optional)
Minimum quantity lubrication (MQL) with pure oil
Machining operations carried out in complete safety thanks to the dead man’s handle
MANUALLY ADJUSTABLE profile reference stops on right and left of machine
Chip bin
Adjustable feet for machine positioning and anchor brackets to fix the machine to the ground
Set up for fumes extraction
Working pressure: 7 bar
Air consumption: 24 NL/cycle (normal litres/cycle)
Additional charge for special power supply with transformer
Additional charge for electrical version UL-CSA
Additional charge for electric cabinet cooling
Additional charge for EAC (Eurasian Conformity) certification
Pneumatic vice with manual positioning (max 2 no. clamps)
Vice transformation with pneumatic block
Supplementary vice with pneumatic block (maximum 2 additional vices) Note: Accessory only applicable if PR-28961 is present.
External stop
Lubrocooling with recycling of cooling liquid in tank (advisable for iron materials) Note: Water/oil emulsion
Beam rotation stop for intermediate angles with manual adjustment
Tool Set Aluminium in HSS Type 2:
1 no. hole drill bit HSS Æ 3 L = 61mm
1 no. hole drill bit HSS Æ 6/12 L = 100mm
1 no. MD single flute milling cutter Æ 6/8 L = 68mm
1 no. MD single flute milling cutter Æ 10 L = 95mm
4 no. collet holder with ring nut ER 20 H = 50mm
1 no. collet Æ 2/3 ER 20
1 no. collet Æ 7/8 ER 20
1 no. collet Æ 9/10 ER 20
1 no. collet Æ 11/12 ER 20
Tool Set Iron in HSS Type 2:
1 no. sintering steel milling bit suitable for through working (4 No.) Æ 6 covered L = 56mm
1 no. HSS single flute milling suitable for through working (4 No.) Æ 8 L = 88mm
2 no. collet holder with ring nut ER 20 H = 50mm
1 no. collet Æ 5/6 ER 20
1 no. collet Æ 9/10 ER 20
ISO 30 ER 20 H 50 collet holder
ISO 30 ER 20 H 70 collet holder
Collet Æ 2/3 ER 20
Collet Æ 4/5 ER 20
Collet Æ 5/6 ER 20
Collet Æ 7/8 ER 20
Collet Æ 9/10 ER 20
Collet Æ 11/12 ER 20
6000DPL Lubexall Oil 5l
6000DPL Lubexall Oil 25l
Lubricating grease for guideways (5kg tank)
Lubricating grease for guideways (1kg tank)
Tank of oil for cooling system by emulsified oil (18.5l)