Adir C CNC Machining Centre

Aluminium
Fom Industrie

CNC Machining Centres

Description

A CNC Machining centre with 3 controlled axis and worktable with pneumatic positioning at 0°/90°/180°

Technical

  • Side and rear guard fixed. Receding front guard with pneumatic control
  • Touch screen console 15” complete with PC
  • CNC controlled interpolating X, Y and Z
  • Axes sliding X,Y,Z on linear guides with high precision
  • X axis movement with servomotor and drive with toothed belt and high pressure reducer
  • Z and Y axes drive with servomotor and ground ball-screw
  • Pneumatic rotation of the work table 0°, 90° to 180°
  • Work table height 850mm
  • Electronic equipment & touch screen display. User-friendly interface. FOMCAM Software licence
  • 4 pneumatic vices that translate along the work table with dual working pressure (low and high) with safety valves + manual stops (2 no)
  • Clamps positioning readout on the work table by CN
  • Automatic/manual tool change ISO 30 cone with cone tool-holder (6 tools)
  • Automatic update of machining parameters when the tool diameter and/or length are modified
  • Max tool length (from tip of spindle): 130mm
  • Electro-spindle servo-ventilated motor ISO 30: 3kW – Electro-spindle regulation 1.000/12.000rpm
  • Axis specifications: Axes travel X = 2715mm, Y = 355mm, Z = 224mm
  • Axes speed X = 25m/min, Y = 13m/min, Z = 11m/min
  • Milling capacity: X = 2675mm, Y = 250mm, Z = 120mm
  • Minimum quantity lubrication (MQL) with pure oil
  • Set-up for central greasing for recirculating ball-screws and linear guides
  • The profile being machined can be greater than the X milling depth (2,675mm) alternatively using stops on the left and the right of the machine
  • Working pressure: 7 bar
  • Work cycle air consumption 43 NL
  • Chip bin
  • Adjustable feet for machine positioning and anchor brackets to fix the machine to the ground
  • Kit for handling machine with forklift
  • Installed power 3.5kW

Download PDF

Optional

Additional charge for special power supply with transformer
Additional charge for electrical version UL-CSA
Additional charge for electric cabinet cooling
Additional charge for EAC (Eurasian Conformity) certification
Pneumatic vice with manual positioning (max 2 no. clamps)
Vice transformation with pneumatic block
Supplementary vice with pneumatic block (maximum 2 additional vices)
5 position automatic tool magazine (ISO 30) Note: Possibility to hold Ø 75mm milling cutter; it replaces the 6-position tool-holder of the standard configuration.
External stop with tunnel
Kit for tapping cycle
Lubrocooling with recycling of cooling liquid in tank (advisable for iron materials) Note: Water/oil emulsion
Beam rotation stop for intermediate angles with manual adjustment
Kit for handling machine with bridge crane
Software licence for office FOMCAM program
Supplementary office licence for “FOMCAM” program
FST SOLID 3 / 4  axes – Machining recognition module starting from a step tridimensional file
Licence for FST STATISTICS C4 program
Module for the insertion of geometrics “defined by the user”  and import of drawings in DXF format for FOM CAM
Module for the graphic designing in 3D for FOMCAM
Wirelesss bar-code rader + data import software for data in accordance to FOM protocol
Data import SW for data in accordance to POM protocol
Data conversion driver
Software licence for “Clock”, module for times calculation for FOM CAM
Software licence for “Wizard”, module for FOM CAM
Tool Set Aluminium Type 1:
– 1 no. hole drill bit HSS single flute Ø 3 L = 61mm
– 1 no. hole drill bit HSS single flute Ø 6/12 L = 100mm
– 1 no. MD single flute milling cutter Ø 10 covered L = 72mm
– 1 no. MD single flute milling cutter Ø 6 covered L = 60mm
– 4 no. collet holder with ring nut ER 20 H = 50mm
– 1 no. collet Ø 2/3 ER 20
– 1 no. collet Ø 5/6 ER 20
– 1 no. collet Ø 9/10 ER 20
– 1 no. collet Ø 11/12 ER 20
Tool Set Iron Type 1:
– 1 no. MD single flute milling cutter Ø 6 L = 56mm
– 1 no. MD single flute milling cutter Ø 8 L = 67mm
– 2 no. collet holder with ring nut ER 20 H = 50mm
– 1 no. collet Ø 5/6 ER 20
–  1 no. collet Ø 7/8 ER 20
ISO 30 cone with milling cutter Ø 75mm thickness 6mm
ISO 30 ER 20 H 50 collet holder
ISO 30 ER 20 H 70 collet holder
Collet Ø 2/3 ER 20
Collet Ø 4/5 ER 20
Collet Ø 5/6 ER 20
Collet Ø 7/8 ER 20
Collet Ø 9/10 ER 20
Collet Ø 11/12 ER 20
Lubri FOM 6l Note: Oil for minimum quantity lubrication
Lubri FOM 20.5l Note: Oil for minimum quantity lubrication
Lubricating grease for guideways (5kg tank)
Lubricating grease for guideways (1kg tank)
Greasing gun
Tank of oil for cooling system by emulsified oil (18.5l)

Gallery

Video

Enquire Now