Argo 40/70/100 CNC Machining Centre

Description

The Argo is a CNC Machining Centre with 3 controlled axes + pneumatic rotation of spindle 0°/90°/180°
Argo 40 – 4m CNC Machining Centre
Argo 70 – 7m CNC Machining Centre
Argo 100 – 10m CNC Machining Centre
The ARGO machining centre has been designed to perform boring and milling work on aluminium and steel profiles. The mechanical specifications of this modern machining centre and of its control system provide economical use in the production of single pieces.

Technical

  • Electro-spindle FOM 6.5Kw 17,000rpm (ISO 30)
  • 12 position tool magazine. (ISO 30) Note: possible housing of single/double tool angular unit and blade-holder cone
  • 4 No. pneumatic vices with independent positioning
  • Left sliding pneumatic stop
  • Full soundproof cover of the machining head
  • Minimum quantity lubrication (MQL) with pure oil
  • Chip conveyor belt
  • Chip bin
  • Set up for fumes extraction
  • Photoelectric cell barrier.
  • Rear and side fences and swinging gate
  • Machine handling kit
  • Electronic equipment ”Power E-Box”
  • Mobile control console with PC, 17” touch screen monitor, mouse and keyboard
  • Software licence for FOMCAM program
  • FOMCAM training course (FOM premises)

Optional

Additional charge for special power supply with transformer
Additional charge for electrical version UL-CSA
Additional charge for electric cabinet cooling
Additional charge for EAC (Eurasian Conformity) certification
Additional clamps with independent positioning (2 No.) Note: Argo 70 max 2 pairs of additional vices – Argo 40 max 1 pair of additional vices
Pendular machining on two working areas Note: At least 2 no. additional vices are required
Pendular machining on two working areas Note: At least 2 no. additional vices are required
RH profile stop kit for long pieces machining or for two pieces without pendular machining Note: Accessory not available with alternate machining present
Flowdrilling kit (steel flowdrilling, not suitable if the profiles are already galvanized) Note: Does not include specific lubricant. Does not include tapping cycle software
Minimum quantity lubrication (MQL) with pure oil with angle head (profile-ends/blade)
Lubricooling with recycling of cooling liquid in tank (advisable for iron materials) Note: Water/oil emulsion
Lubricooling with recycling of cooling liquid in tank (advisable for iron materials) Note: Water/oil emulsion
Additional charge for forced lubrication for guideways movement
Machine handling by container
Software licence for office FOMCAM program
Supplementary office licence for FOMCAM program
Software licence FST MI program for office
FST SOLID 3/4 axes – Machining recognition module starting from a step tridimensional file
FST SOLID additional software licence (3/4 axes CNC machining centre)
Licence for FST STATISTICS C4 program
Wireless bar-code reader + data import software for data in accordance to FOM protocol
Data import SW for data in accordance to FOM protocol
Data conversion driver
Module for the insertion of geometrics “defined by the user” and import of drawings in DXF format for FOM CAM
Software licence for “Clock”, module for times calculation for FOM CAM
Software licence for “Wizard”, Module for FOMCAM
Module for the graphic designing in 3D for FOMCOM
Software licence for tapping cycle
TOOL SET TYPE A1/ISO 30:
– 1 no. single flute milling cutter Ø 5 L = 50mm
– 1 no. single flute milling cutter Ø 8 L = 63mm
– 1 no. single flute milling cutter Ø 10 L = 72mm
– 3 no. collet holder H = 67
– 1 no. collet Ø 9/10 ER 32
– 1 no. collet Ø 7/8 ER 32
– 1 no. collet Ø 4/5 ER 32
TOOL SET TYPE A2/ISO 30:
– 1 no. single flute milling cutter Ø 8 L = 63mm
– 1 no. single flute milling cutter Ø 10 L = 72mm
– 1 no. single flute drill bit hss cutter Ø 3 L = 61mm
– 1 no. single flute milling cutter Ø 6 L = 60mm
– 1 no. double flute milling cutter Ø 10 L = 110mm
– 1 no. double diam. drill bit hss Ø 12/6 L = 83mm
– 4 no. collet holder H = 67
– 2 no. collet holder H = 50
– 1 no. collet Ø 9/10 ER 32
– 1 no. collet Ø 7/8 ER 32
– 1 no. collet Ø 5/6 ER 32
– 1 no. collet Ø 2/3 ER 32
TOOL SET TYPE A3/ISO 30:
– 1 no. single flute drill bit HSS cutter Ø 3.2 L = 57mm
– 1 no. single flute milling cutter Ø 5 L = 50mm
– 1 no. single flute milling cutter Ø 6 L = 60mm
– 1 no. single flute milling cutter Ø 6 L = 60mm
– 1 no. single flute milling cutter Ø 8 L = 63mm
– 1 no. single flute milling cutter Ø 10 L = 72mm
– 1 no. double flute milling cutter Ø 10 L = 110mm
– 1 no. double diam. milling cutter Ø 12/6 L = 83mm
– 1 no. single flute milling cutter Ø 14 L = 100mm
– 6 no. collet holder H = 67
– 2 no. collet holder H = 50
– 1 no. collet Ø 3/4 ER 32
– 1 no. collet Ø 4/5 ER 32
– 1 no. collet Ø 5/6 ER 32
– 1 no. collet Ø 7/8 ER 32
– 3 no. collet Ø 9/10 ER 32
– 1 no. collet Ø 13/14 ER 32
– 1 no. disk milling cutter 114 x 6 x 32
– 1 no. set cone Ø 32 x blade
– 1 no. spacer thickness 26.5
Single tool angular unit
Double tool angular unit
Angular unit for blade (blade excluded)
ISO 30 cone for blade
ISO 30 cone with milling cutter Ø 125mm
Blade Ø 220mm (Z=60 straight teeth)
Blade Ø 220mm (Z=40 straight teeth)
Blade Ø 180mm (Z=32 teeth, trapeze teeth shape)
Blade Ø 220mm (Z=60 teeth, trapeze teeth shape)
Blade Ø 220mm (Z=40 teeth, trapeze teeth shape)
ISO 30 ER 32 H 50 collet holder
ISO 30 ER 32 H 67 collet holder
Collet Ø 2/3 ER 32
Collet Ø 4/5 ER 32
Collet Ø 5/6 ER 32
Collet Ø 7/8 ER 32
Collet Ø 9/10 ER 32
Collet Ø 13/14 ER 32
Lubri FOM 6l Note: Oil for minimum quantity lubrication
Lubri FOM 20.5l Note: Oil for minimum quantity lubrication
Lubricating grease for guideways (5kg tank)
Lubricating grease for guideways (1kg tank)
Greasing gun
Tank of oil Flowdrill (5l)
Tank of oil for cooling system by emulsified oil (18.5l)

Gallery

Video

Enquire Now