Blitz 50/55/60 Double Head Sawing Machine

Description

A double-head sawing machine with motorized movement of the mobile head and electronic control of the head tilting
Blitz 50 – 5 metre cutting facility
Blitz 50 – 6.6 metre cutting facility
Blitz 55 – 5 metre cutting facility
Blitz 55 – 6.6 metre cutting facility
Blitz 60 – 5 metre cutting facility
Blitz 60 – 6.6 metre cutting facility

Technical

  • First head fixed, second head mobile with automatic positioning. Positioning carried out by servomotor and reducer with centesimal precision
  • Maximum cutting distance between the two heads: 5 – 6.6m depending on the version supplied (can be increased with dedicated software, optional)
  • Cutting precision ± 0.15mm
  • Motor-driven cutting head tilted by means of a recirculating ball screw and nut offering high precision, repeatability and reliability
  • Cutting angles vary according to the machine model, with electronic control of all graduations:
    – from 10° to 135° Blitz 50
    – from 12° to 135° Blitz 55
    – from 20° to 135° Blitz 60
  • ±0,05° precision and repeatability
  • 2 no. tungsten carbide saw blades Ø 500 (Blitz 50) Ø 550 (Blitz 55) Ø 600 (Blitz 60) mm
  • Oleo-pneumatic blade exit speed control (adjustable blade exit speed – rapid retraction)
  • Cutting zone guards
  • Machine state indicator LEDs
  • 4 no. horizontal vices which have a patented push system with a vertical component to guarantee contact with the machine horizontal table
  • 2 no. vertical vices on internal side of the blade, automatically excludible for cuts with internal angles between 90° and 135°
  • Movable head roller table 2.5m
  • Minimum quantity lubrication (MQL) with pure oil
  • Direct motor to blade transmission
  • Blade motors 2.2 kW – 2,800 rpm
  • Electric panel separate from pneumatic panel in lateral position
  • Set-up for the installation of a chips and fumes extraction system
  • Horizontal profile support tables in ground hardened steel and vertical in stainless steel
  • Set up for the installation of a central motor-driven conveyor belt for collecting waste material and chips including inclined end
  • Flashing lights to warn when the machine is in operation
  • Electric brake to stop the blade in less than 10 seconds
  • Rapid tap for the easy connection and disconnection of the vertical vices
  • Pneumatic circuit mounted directly on the heads for increased speed and ease of calibrating the pneumatic parts regardless of machine length

Optional

Additional charge for special three-phase voltage and cycles
Additional charge for electrical version UL-CSA
Additional charge for special power supply with transformer
Additional charge for electric cabinet cooling
Additional charge for EAC (Eurasian Conformity) certification
Blade exit position transducer kit Blitz 50 – Blitz 55
Blade exit position transducer kit Blitz 60
Blade rotation inverter kit Note: with standard voltages only. Obligatory for model Blitz 60 in the case of 60Hz mains frequency
PORTER infeed roller table + vertical rollers 3m
PORTER infeed roller table + vertical rollers 4.2m
Retractable pneumatic intermediate profile support (1 no.) Note: it must be positioned as 2o support
Retractable external profile support (LH) Note: position is as 3rd support
External vertical vice kit
Adjustable buffer kit for vertical vice (compulsory on both heads)
Adjustable double buffer kit for vertical vice (compulsory on both heads)
Automatic profile height measuring device with lower mobile sensor + vertical vice
Manual kit for under size cuts
Pneumatic profile lifter roller kit (for head loading area)
Full protective casing 5m
Full protective casing 6.6m
Front baffles 5m
Front baffles 6.6m
Sound absorbing panels for additional soundproofing of Blitz 5m
Sound absorbing panels for additional soundproofing of Blitz 6.6m
Centre machine chip conveyor kit Note: compulsory for version with protective casing
Swarf conveyor belt with inclined end (for 5m version)(Unloading height 580mm)
Swarf conveyor belt with inclined end (for 6.6m version)(Unloading height 580mm)
Step-by-step cutting kit with photocells barrier for cuts at the same angle (parallel cuts) for machines 5m in length
Step-by-step cutting kit for cuts at the same angle (parallel cuts) with two handed control
Step-by-step cutting kit for cuts at the same angle (parallel cuts)
Step-by-step cutting kit with photocells barrier for cuts at the same angle (parallel cuts) for machines 6.6m in length
Step-by-step kit with variable angle cutting 5m
Note: inclusive of
·       Step-by-step cutting software licence
·       Front and cabinet side lateral half casing
·       Mobile head roller table side and rear safety fencing and front baffles
·       Operator side safety photocell
·       Mobile unloading table and unloading belt on fixed head
·       Special vices on fixed and mobile head
Step-by-step kit with variable angle cutting 6.6m
Note: inclusive of
·       Step-by-step cutting software licence
·       Front and cabinet side lateral half casing
·       Mobile head roller table side and rear safety fencing and front baffles
·       Operator side safety photocell
·       Mobile unloading table and unloading belt on fixed head
·       Special vices on fixed and mobile head
Cutting lists optimization module
Formulas and Types module, to create parametric articles and generate the resulting cutting lists
Step-by-step kit with variable angle cutting
Note: inclusive of
·       Step-by-step cutting software licence
·       Mobile unloading table and unloading belt on fixed head
·       Special vices on fixed and mobile head
Data conversion driver. For supported formats, see list in attachment
Software user licence for special length cutting (extra-large and super-minimum) and trim cuts at variable angles
Licence for FSTCUT4 program for office
Licence for FST STATISTICS C4 program
Teleservice contract for single machine
Wireless optical barcode reader and relative management software for work lists
Label printer
Paper roll for printer; min no 10 pieces (58 x 35mm)
Paper roll for printer; min no 10 pieces (100 x 36mm)
Saw blade Ø 500mm for tube-shaped aluminium profiles
Saw blade Ø 550mm for tube-shaped aluminium profiles
Saw blade Ø 600mm for tube-shaped aluminium profiles
Crate packing 5m
Crate packing 6.6m
Machine lifting with bridge crane Note: Only for machines without integral guard
FOM Oil 5l
FOM Oil 20l
Lubricating grease for guideways (1kg tank)
Lubricating grease for guideways (5kg tank)
Greasing gun

Gallery

Video

Enquire Now