Additional charge for special power supply with transformer
Additional charge for electrical version UL-CSA
Additional charge for electric cabinet cooling
Additional charge for EAC (Eurasian Conformity) certification
Additional tool magazine with 3 positionings for housing: single/double tool angular kit, vertical blade tool angular and blade-holder cone (ISO 30) + Minimum quantity lubrication (MQL) with pure oil Note: Maximum blade diameter 200mm
Additional clamps with positioning through carriage (2 no.) Note: Dali 70 max 2 additional vice pairs
Additional charge for transforming the standard clamps into motorizes clamps with independent positioning
Additional clamps with independent positioning (2 no.) Note: Accessory only available with PR-27237 Dali 70 max 2 additional vice pairs
Pendular machining on two working areas Note: At least 2 no. additional vices are required
Pendular machining on two working areas Note: At least 2 no. additional vices are required
RH profile stop kit for long pieces machining or for two pieces without pendular machining Note: Accessory not available with alternate machining present
Flowdrilling kit (steel flowdrilling, not suitable if the profiles are alrady galvanized) Note: Does not include specific lubricant. Does not include tapping cycle software (ZB-78091)
Lubricooling with recycling of cooling liquid in tank (advisable for iron materials) Note: Water/oil emulsion
Chip conveyor belt
Forced/times lubrication for guideways and recirculating ball screw movement
Machine handling by container
Software licence for office FOMCAM program
Supplementary office licence for FOMCAM program Note: Accessory only applicable if ZP-26866 is present
Software licence FST MI program for office Note: ZP-26866 must be selected
FST SOLID ¾ axes – Machining recognition module starting from a step tridimensional file
FST SOLID additional software licence (3/4 axes CNC machining centre)
Licence for FST STATISTICS C4 program
Module for the insertion of geometrics “defined by the user” and import of drawings in DXF format for FOM CAM
Module for the graphic designing in 3D for FOMCOM
Wireless bar-code reader + data import software for data in accordance to FOM protocol (ZP712762) ote: For a list of software capable of exporting the work lists to FOM format see attachment to code ZP712762
Data import SW for data in accordance to FOM protocol (included in PR-29529)
Software licence for tapping cycle
Software licence for “Clock”, module for times calculation for FOM CAM
Software licence for “Wizard”. Module for FOMCAM
TOOL SET TYPE A1/ISO 30:

1 no. single flute milling cutter Æ 5 L = 50mm (HZ-43794)

1 no. single flute milling cutter Æ 8 L = 63mm (HZ-43796)

1 no. single flute milling cutter Æ 10 L = 72mm (HZ-43795)

3 no. collet holder H = 67 (DR-24635

1 no. collet Æ 9/10 ER 32 (DR-75901)

1 no. collet Æ 7/8 ER 32 (DR-75899)

1 no. collet Æ 4/5 ER 32 (DR-75896)
TOOL SET TYPE A2/ISO 30:

1 no. single flute milling cutter Æ 8 L = 63mm (HZ-43796)

1 no. single flute milling cutter Æ 10 L = 72mm (HZ-43795)

1 no. single flute drill bit hss cutter Æ 3 L = 61mm (HZ-76292)

1 no. single flute milling cutter Æ 6 L = 60mm (HZ-43792)

1 no. double flute milling cutter Æ 10 L = 110mm (HZ302415)

1 no. double diam. drill bit hss Æ 12/6 L = 83mm (HZ-39024)

4 no. collet holder H = 67 (DR-24635)

2 no. collet holder H = 50 (DR-24634)

1 no. collet Æ 9/10 ER 32 (DR-75901)

1 no. collet Æ 7/8 ER 32 (DR-75899)

1 no. collet Æ 5/6 ER 32 (DR-75897)

1 no. collet Æ 2/3 ER 32 (DR-75894)
TOOL SET TYPE A3/ISO 30:

1 no. single flute drill bit HSS cutter Æ 3.2 L = 57mm (HZ-78782)

1 no. single flute milling cutter Æ 5 L = 50mm (HZ-43794)

1 no. single flute milling cutter Æ 6 L = 60mm (HZ-43792)

1 no. single flute milling cutter Æ 6 L = 60mm (HZ-43792)

1 no. single flute milling cutter Æ 8 L = 63mm (HZ-43796)

1 no. single flute milling cutter Æ 10 L = 72mm (HZ302415)

1 no. double flute milling cutter Æ 10 L = 110mm (HZ302415)

1 no. double diam. milling cutter Æ 12/6 L = 83mm (HZ-39024)

1 no. single flute milling cutter Æ 14 L = 100mm (HZ-45257)

6 no. collet holder H = 67 (DR-24635)

2 no. collet holder H = 50 (DR-24634)

1 no. collet Æ 3/4 ER 32 (DR-75895)

1 no. collet Æ 4/5 ER 32 (DR-75896)

1 no. collet Æ 5/6 ER 32 (DR-75897)

1 no. collet Æ 7/8 ER 32 (DR-75899)

3 no. collet Æ 9/10 ER 32 (DR-75901)

1 no. collet Æ 13/14 ER 32 (DR-76047)

1 no. disk milling cutter 114 x 6 x 32 (GR-71957)

1 no. set cone Æ 32 x blade (DR-26446)

1 no. spacer thickness 26.5 (OP301086)
Double tool angular unit
Angular unit with blade Æ 200 thickness 4mm
ISO 30 cone with blade Æ 200 thickness 4mm
ISO 30 ER 32 H 50 collet holder
ISO 30 ER 32 H 67 collet holder
Collet Æ 2/3 ER 32
Collet Æ 4/5 ER 32
Collet Æ 5/6 ER 32
Collet Æ 7/8 ER 32
Collet Æ 9/10 ER 32
Collet Æ 13/14 ER 32
Lubri FOM 6l Note: Oil for minimum quantity lubrication
Lubri FOM 20.5l Note: Oil for minimum quantity lubrication
Lubricating grease for guideways (5kg tank)
Lubricating grease for guideways (1kg tank)
Greasing gun
Tank of oil Flowdrill (5l)
Tank of oil for cooling system by emulsified oil (18.5l)