Keope E1 Double Head Sawing Machine

Description

A double head sawing machine for compound angles with motorised movement of the mobile head
Two options available:
– 5 metre cutting facility
– 6.6 metre cutting facility

Technical

  • Blade motors, three phase 5 HP (3.7 kW) – Eurovoltage 230/400V- 50Hz; 275/480V – 60 Hz
  • Blade rotation speed 2400 RPM
  • External manual head rotation between 90° and 140° (Y and Z axes) with degrees display and fixed positions for 45° – 90° – 135° cuts (vertical axis)
  • Internal manual head rotation between 90° and 22.5° (Y and Z axes) with degrees display and fixed positions for 45° – 90° – 135° cuts (vertical axis)
  • Internal blade inclination at 90° and at 45° (W and U axes) via pneumatic movement (horizontal axis) *Blade inclination is limited in degrees when head rotation is below 45° (see Pic. A)
  • Handling of mobile head (X axis) with controlled axis managed by N.C.
  • Mobile head max. speed 25 m./min
  • Hydraulic tungsten carbide saw blade feed (adjustable blade exit speed – quick return)
  • Minimum cutting capacity with heads at 90°: 470 mm
  • Maximum cutting capacity: 5000mm/6600mm according to the version (can be increased with specific software)
  • Working pressure: 7 bar
  • Maximum air consumption per minute: 590 NL/min

Optional

Additional charge for special three-phase voltage and cycles
Additional charge for special power supply with transformer
Additional charge for electrical version UL-CSA
Additional charge for electric cabinet cooling
Additional charge for EAC (Eurasian Conforminty) certification
Blade exit position transducer kit
Profile lifting kit
400 Roller table loading/unloading side 2.8m
400 Roller table loading/unloading side 4.7m
Loading roller conveyor 400 (Useful length 2.2m) (mobile head)
Swarf conveyor belt with tiled end (for 5m version)(Unloading height 700mm)
Swarf conveyor belt with tiled end (for 6.6m version)(Unloading height 700mm)
Chip conveyor
Additional horizontal clamps on fixed and mobile head (90o cuts) 2 No.
Intermediate pneumatic retractable support (max 3 supports or 4 supports for the 6.6m version)
Manual stop kit for recovery of short extruded pieces
Machine handling kit Note: Alsoused for transporting the machine in a container
Software user license for special length cutting (extra-large and super-minimum) and trim cuts at variable angles
Data conversion driver. For supported formats, see list in attachment
License for step-by-step cutting software, complete with 1 extra surface on fixed head, horizontal clamps on fixed and mobile head (no.2),  90° cuts, two-hand control
Software license kit for step-by-step cycle (at 90° only) with photocell safety barrier for machine with useful cut 5m including:
·       Supplementary table on fixed head
·       Horizontal vices on fixed and mobile head (2 no)
·       Front safety plates
·       Mobile head and roller table side safety fences with interlocked door
·       Rear fences
·       90° cut only
Software license kit for step-by-step cycle (at 90° only) with photocell safety barrier for machine with useful cut 6.6m including:
·       Supplementary table on fixed head
·       Horizontal vices on fixed and mobile head (2 no)
·       Front safety plates
·       Mobile head side and roller table side safety fences with interlocked door
·       Rear fences
Cutting lists optimization module
License for FSTCUT4 program for office
License for FST STATISTICS C4 program
License for FST Solid2Cut program
Label printer
Paper roll for printer; min no 10 pieces (100 x 36mm)
Paper roll for printer; min no 10 pieces (58 x 35mm)
Teleservice contract for single machine
Saw blade Ø 600mm for tube-shaped aluminium profiles
Crate packing 5m
Crate packing 6.6m
FOM Oil 5l
FOM Oil 20l
Lubricating grease for guideways (1kg tank)
Lubricating grease for guideways (5kg tank)
Greasing gun

Gallery

Enquire Now