Keope E5 Five Axis Double Head Sawing Machine

Description

A double-head sawing machine for compound angles with motorised movement of the mobile head.

Two options:
5 metre cutting facility
6.6 metre cutting facility

Technical

  • Blade motors, three phase 5 HP (3.7 kW) – Eurovoltage 230/400V- 50Hz; 275/480V –  60Hz
  • Blade rotation speed 2400rpm
  • Head rotation between 90° and 140° (Y and Z axes) outside controlled axis managed by C.N. (vertical axis)
  • Internal head rotation between 90° and 22.5° (Y and Z axes) with controlled axis managed by C.N. (vertical axis)
  • Internal blade inclination at 90° and at 45° (W and U axes) with controlled axis managed by C.N. (horizontal axis) Blade inclination is limited in degrees when head rotation is below 45°
  • Handling of mobile head (X axis) with controlled axis managed by N.C.
  • Mobile head max. speed 25m/min.
  • Hydraulic tungsten carbide saw blade feed (adjustable blade exit speed – quick return)
  • Minimum cutting capacity with heads at 90°: 470mm
  • Maximum cutting capacity: 5000mm/6600mm according to the version (can be increased with specific software)
  • Working pressure: 7 bar
  • Max air consumption per cutting cycle: 83 NL

Optional

Additional charge for special three-phase voltage and cycles. Note: to be specified at time of order.
Additional charge for special power supply with transformer
Additional charge for electrical version UL-CSA
Additional charge for electric cabinet cooling
Additional charge for EAC (Eurasian Conformity) certification
Blade exit position transducer kit
Profile lifting kit
400 Roller table loading/unloading side 2.8m
400 Roller table loading/unloading side 4.7m
Loading roller conveyor 400 (Useful length 2.2m) (mobile head)
Swarf conveyor belt with tiled end (for 5m version) (Unloading height 700mm)
Swarf conveyor belt with tiled end (for 6.6m version) (Unloading height 700mm)
Chip conveyor
Additional horizontal clamps on fixed and mobile head (90o cuts) 2 No.
Intermediate pneumatic retractable support (max 3 supports or 4 supports for the 6.6m version) Note: If one chooses 1 or 2 supports, indicate whether to position them as 1st, 2nd, 3rd (or 4th)
Manual stop kit for recovery of short, extruded pieces
Machine handling kit Note: Also used for transporting the machine in a container
Software user license for special length cutting (extra-large and super-minimum) and trim cuts at variable angles
Data conversion driver. For supported formats, see list in attachment
LOLA annual licence Double Head Sawing Machines
LOLA additional licence Double Head Sawing Machines
LOLA Annual renewal Double Head Sawing Machines
LOLA Exporter Licence for Double Head Sawing Machines
Licence for step-by-step cutting software, complete with 1 extra surface on fixed head, horizontal clamps on fixed and mobile head (no.2),  90o cuts, two-hand control
Software licence kit for step-by-step cycle (at 90o only) with photocell safety barrier for machine with useful cut 5m including
·       Supplementary table on fixed head
·       Horizontal vices on fixed and mobile head (2 no)
·       Front safety plates
·       Mobile head and roller table side safety fences with interlocked door
·       Rear fences
·       90o cut only
Note: For variable size cuts, ZP714309 is recommended
Software licence kit for step-by-step cycle (at 90o only) with photocell safety barrier for machine with useful cut 6.6m including:
·       Supplementary table on fixed head
·       Horizontal vices on fixed and mobile head (2 no)
·       Front safety plates
·       Mobile head side and roller table side safety fences with interlocked door
·       Rear fences
Note: For variable size cuts, ZP714309 is recommended
Cutting lists optimization module Note: Compulsory if ZP714310 is present or if one of the variable angle step-by-step cut kits is present.
Formulas and Types module to create parametric articles and generate the resulting cutting lists
Licence for FSTCUT4 program for office
SOLID PLUS CUT software licence
Licence for FST STATISTICS C4 program
Teleservice contract for single machine
Wireless optical barcode and QR code reader and relative management software for work lists
Label printer
Paper roll for printer; min no 10 pieces (100 x 36mm)
Paper roll for printer; min no 10 pieces (58 x 35mm)
Saw blade Æ 600mm for tube-shaped aluminium profiles
Crate packing 5m
Crate packing 6.6m
6000DPL Lubexall Oil 5l
6000DPL Lubexall Oil 25l
Lubricating grease for guideways (1kg tank)
Lubricating grease for guideways (5kg tank)

Gallery

Video